Software installation
Insert the CD into the CD-ROM drive or
download the latest software from our website. Double click
the .exe file and the setup program will initiate. The setup
program will guide you through the software install.
Once setup is complete you can start USBLoad.
Programming the Funcard USB
Insert the smartcard into the programmer
with the contacts facing down. If the message "Func6"
(1) appears, the card
is inserted correctly.
The mainwindow contains all functions to
program the Funcard. Use
the Write,
Read or Verify button
to perform the wanted actions on the card.
Click the "open file" icon for
the "Microcontroller". (1)
Select the flash file you want to use.
Click the "open file" icon for the "External EEPROM".
(2)
Select the external eeprom file you want to use.
By
clicking on the check boxes (3)
you can enable/disable the files.
Now you can actually program the Funcard by
pushing the "Write" button and the complete smartcard will
be programmed automatically within 12 seconds. The progress bars (1-2-3-4)
show the programming real time.
The program starts by
writing the necessary loader file into the Flash memory (1).
When the loader file is successfully
programmed, the External EEPROM will be programmed first
(3).
When the External EEPROM is done, the Flash
memory will be programmed next (1).
When the Flash memory is done, the Internal
EEPROM has to be programmed (2).
Your card is ready now and the text "Write
card successful" will appear shortly.
All progress bars are fully loaded (4).
If you have problems with programming a
smartcard, first erase the smartcard with the erase button.
Preferences
The Preferences
can be opened by selecting "Preferences" under the "File"
menu.
You can enable a beeb when
done programming, reading or erasing a card.
Default short EEPROM hex-files are written to disk by removing blank locations.
You can save time by not writing the same data to flash.
The buttons for the internal can be disabled in the main window.
Languages
Languages can be changed by
selecting a language in the Language menu.
