NEW DESIGN

"The arrow shaped design, with an injection-moulded casing in matte blue ABS, will look good in any environment. The new arrow case ensures that you have a high quality product from Argolis with the latest innovative hardware and software features."
NEW DESIGN

The arrow shaped design, with an injection-moulded casing in matte blue ABS, will look good in any environment. The new arrow case ensures that you have a high quality product from Argolis with the latest innovative hardware and software features.

GENERAL

The SmartReader is an USB cardreader /programmer based on a powerful ATMEL ARM 91 processor. The SmartReader + incorporates an integrated USB to Serial converter, which enables the SmartReader plus to work with all standard Phoenix compatible Linux and Windows applications.

The SmartReaders supports besides Linux/Windows computers and receivers like Octagon SF-1018 HD PVR Linux Twin, various Linux and Windows applications for PCI-DVB or USB-DVB.

Details
...................................................................................................................
-         Powerfull ARM 91 Thumb Processor
-         High-performance 32-bit RISC Architecture
-         High-density 16-bitInstruction Set
-         64 Kbytes, organized in 512Pages of 128 Bytes (Single Plane)
-         16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
-         Low-power RC Oscillator, 3 to20 MHz On-chip Oscillator and one PLL
-         Supports 3.20, 3.43, 3.69,4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0
          and 16.0 MHz for smartcards (T=0 and T=1)
-         No switches on programmer to select the desired mode, automatic frequency controll
-         5V smartcard support
-         Frequency/Baudrate autocalculation and Frequency Generator
-         Developer guide available.
-         Works on all Dreambox Models with USB connection, also on 6 MHz with Dreambox 7025.
-         Can be cascaded with more SmartReaders (>100) in 1 system using an USB Hub
-         Fullspeed USB1.1/ USB2.0
-         Com Port via USB
-         No power supply or cables required
-         True ISO7816
-         Upgradable firmware
-         Windows driver available
-         The Full speed USB communication ensures fast and correct data transfer to the card
-         Compatible with PCI-DVB or USB-DVB devices
...................................................................................................................

SmartReader Plus                                          New Innovative Design
HOME      |       DETAILS      |        DOWNLOADS       |        NEWS       |       CONTACT
The Smargo® SmartReader Plus can not only be used in Linux or Windows computers but also in satellite receivers, routers, USB hubs or other embedded systems, as long as an USB connection is available and open source software is supported. 

The SmartReader Plus is compatible with most common smartcards and the frequency is adjustable.

The integrated USB to Serial converter enables the SmartReader Plus to work with all standard Phoenix compatible Linux and Windows applications.
2009 Copyright Argolis Argentum B.V.


www.koeroe.eu
Smargo ®
SmartReader Plus

       
       CONTACT NOW